Difference between revisions of "Test Case Merging Collision"

From IWRAP
Jump to navigation Jump to search
(New page: == Introduction == This page describes one of a series of selected Test Cases which have been analysed/verified by use of the IWRAP program and by hand calculation. Only the number of coll...)
 
Line 7: Line 7:


[[Image:20090405 Test Case Merging Collision Fig1.jpg]]
[[Image:20090405 Test Case Merging Collision Fig1.jpg]]
To calculate this scenario with the IWRAP tool, do the following steps:
* Define leg;
* define traffic distribution in each direction;
* define causation factors;
* define number of ships in each direction;
* run the job and read results.




Revision as of 14:45, 5 April 2009

Introduction

This page describes one of a series of selected Test Cases which have been analysed/verified by use of the IWRAP program and by hand calculation. Only the number of collision candidates is calculated.

This test case calculates the number of Merging collisions per year.

The Scenario

20090405 Test Case Merging Collision Fig1.jpg


Hand calculation of the Crossing Collision Scenario

Collision due to Merging traffic is calculated in the same manner as calculating Crossing collisions.


Source: IWRAP Mk II, Basic Modelling Principles for Prediction of Collision and Grounding Frequencies, (draft working document), Rev. 4, 2008.03.09, Peter Friis-Hansen, Technical University of Denmark.

Retrieved from "http://www.iala-aism.org/wiki/iwrap/index.php?title=Test_Case_Merging_Collision&oldid=135"